GMS series hot air circulating tunnel sterilization oven using electric heating as the heat energy, the energy generated by
the electric heating elements, the use of hot air circulating fan
oven heating section of Class 100 clean air inside the bottle of
convective heat exchange cycle, the required sterilization of the
bottle the heat transfer, and continuous supply of fresh air, while
eliminating air or saturated humid chamber heat, so as to achieve
drying of the items are sterilized bottles.
You can choose different width and length of net conveyor according
to real production capacity requirements ,its maximum production
Capacity can reach over 1200bts/min
The machine consists of stainless steel mesh belt conveyor bottle
items are in the process of belt conveyor; the bottles pass the one hundred laminar flow air heat and circulation, so as to achieve sterilization drying effect. Low temperature inside the
bottle after warming up to cooling high heat sterilization,
sterilized bottle to complete the whole process. Among them, the
heat sterilization section of the air, when the high temperature
hot air through the fan filter purified by high wind form a cycle,
so purification of the bottle in the purification of one hundred
hot air circulation under wind pressure of rapid and uniform drying
and sterilization, it must block the entry of outside air, water
content of the hot and humid air through the exhaust port from the
plane. Among them, the heating section of the air in the oven is
heating cycle. Oven built-in temperature measurement points, the
required sub-set temperature and automatically adjust the control.
Adopt LCD and touch screen (PT) and programmable logic controller (PLC)
Heating machine, run and other process parameters set by the programmable logic controller
Machine inverter air volume can be set to automatically balance. If
the room door was wide open, pressure changes, into the fan,
exhaust fan automatically adjust the frequency to pressure, if
still can not maintain pressure balance, exhaust valve closed to
prevent outside air intrusion.
With the parameter display, segmented display, automatic computer
printing records and fault alarm and other functions
100 laminar flow system, 100 segment and protect the cooling
section are heat sterilization section 100 laminar flow. To prevent
outside air into the equipment, ensure the work room to keep 100
Adopt sprocket body transmission network, eliminating the deviation is generally easy to
network with defects. Belt material uses 316 stainless steel.
This series of models to YY0217.3-2005 pharmaceutical industry
standards, the GMP standard indicators
Oven equipped with seven pressure tables, separately for each
section of high efficiency filter, the room with the cooling
section, with the high temperature section of the cooling section
and one hundred high-temperature protection section of the air
pressure detection section.
Equip with DOP Authentication port on the box, enabling customers to
Uniform heat distribution within the oven, sterilization
temperature to ensure the segment ± 5 ℃.
FH value control exact, if not reach the sterilization temperature
and sterilization time, the oven automatically stop, the machine runs with traceability. A failure storage function,
the resulting failure to run the machine has auto-save feature. And
record the causes of failure, time and exclusions.
Temperature changes during the production process can be recorded and stored, to facilitate
viewing and on file at any time. Print data in two ways:
multi-point temperature recorder curve with print. Display time of temperature curve is 30 milliseconds and precise control.
With a pressure balance system, using electric contact pressure table control and display, the oven can accurately control the pressure
balance of the cabinets.
Equip with seven electrical contacts pressure table, control the pressure
and all the various sections of a single high efficiency filter is
equipped with a pressure differential table. Accurate control each pressure, each high-pressure filter equipped with pressure table,
accurate control efficient filter.
Tunnel oven a full set of high efficiency filters adopt embedded installation, the both side of filter used hinge clamp is very easy to replace and install,
filters on both sides with leak detection, leak monitoring device.
In the region maintain continuous to 100 laminar flow, the filter specifications using the international
standard specifications of the filter.
Hot-air cycling fan and high efficiency filters can be temperature> 400 ℃
Insulation materials use silicate, heat insulation section thickness 150mm, shell
temperature below 40 ℃.
Has “duty" fan function.
Tunnel oven belt equips with ultrasonic cleaning in line.
Touch screen has three password-protected.
Bottle size:20ml bottles
Sterilization time :≥ 5Min
Network speed: 50-250mm/Min
Purification grade: 100 purification
Cooling method: air-cooled
Front laminar flow fan: 2500m ³ / h, Wind